Share
this page
Request Quotation
UNICOM7000
large multi-task machining centre

Unicom7000

Powerful turning
with 5-axis machining

High productivity on
taller components

More productivity

More capacity and more clearance in the working envelope…the Unicom 7000 is all about achieving more productivity for larger components. Like its brother – the Unicom 6000 – this multi-task portal machine delivers the output without sacrificing the quality. What makes it different from the 6000 is that the standard configuration includes a vertical carousel station and pallet changer, and allows for much bigger pallet sizes. With fewer setups and shorter lead times, this extremely accurate machine is a favourite for taking on big work pieces in high output manufacturing.

benefits

  • Short lead times
  • Reliable processing
  • Repeatable accuracy

Short lead times

Today, even large components often have to be produced in ever-shorter lead times. The Unicom 7000 is our most adaptable and functional multi-tasking machine. It not only removes large quantities of steel very quickly, but its pallet loading stations allow setup to take place during the machining cycle, which raises productivity further. The combined operation results in short lead times, without any concessions in turning and milling capacity.

Reliable processing

With its two-stage gearbox drive for milling and turning, the Unicom 7000 achieves high torque and high rotational speed. The machine’s ram with its turning tool adapter allows ‘plunging’ into the part as well as the use of short, stable tools. And the in-process measuring probe, which ensures reliable processing of tight fits, saves time.

Repeatable accuracy

The Unicom 7000 has an in-process measuring probe, which functions without needing a tool change. This also means that repeatability of the setup station can be guaranteed to a few microns. What’s more, even higher accuracies in end products are achieved since there are fewer machining setups to start with. For convenience, there is just one tooling system in the whole machine for the turning and milling operations. And for safety, there’s a fully enclosed cabin.

technical specifications

The Unicom 7000 has an extensive tool magazine and several accessories to enable turning, milling drilling and grinding. Various pallet sizes are possible on the same machine. It can be set up to operate with 4- or 5-axis machining, with multiple head variations.

  • Work Area
  • Spindle
  • Various
  • Accessories

Work Area

  • X-axis
    2.675 mm
  • Y-axis
    2.300 mm
  • Z-axis
    1.600 mm
  • Vertical clearance
    1.800 - 2.200 mm
  • Table
  • Table size
    1.250 - 1.800 ø mm
  • Swing circle
    2.000 / 2.200 ø mm

Spindle

  • Gear box driven spindle and values
    42 kW
    6.000 min-1
    1.600 Nm
  • Carousel turning station
    70 / 95 kW
    25.000 / 38.000 Nm

Various

  • Tooling
  • Taper size
    HSK100A / Capto C8
  • Number of pockets
    # 97-200
  • Tool change time
    10 sec
  • Speed
  • Rapid traverse
    40.000 mm/min
  • Feed Rate
    5-40.000 mm/min

Accessories

  • Pallet changer
    standard
  • Right angular indexing head
    standard
  • Universal indexing head
    o
  • 5-axes configuration
    o
  • In-process measuring
    o

applications

  • Aerospace
  • General machining
  • Oil & gas
  • Energy
  • Train

Requiring one of the highest chip removal rates in the market, the aerospace industry needs high dynamic machines. The Unipent4000 and Unipro5000 for example are ideal for volume production in this demanding environment and can remove 10 litres per minute of aluminium while maintaining the highest accuracy. For extra large parts or engine components, the Uniport6000-HV, Uniport7000, Unicom6000 and Unicom7000 machines offer the best solutions.

applications for aerospace

Find out more

At Unisign we understand that our customers don’t just buy a machine, they buy a process. And price per part is key. So for general applications we offer high torque machines with high material removal rates, including 5-axis and 5-sided machining and a choice of moving table or palletized, depending on the footprint available.

applications for general machining

Find out more

Pumps and valves for the oil & gas industry can be highly complex parts to produce with seals, gaskets, flanges and requirements like spiral grooves and elliptical conical eccentric turning. The machining centres from Unisign, with their high degree of automation and specially designed software, are a unique solution capable of milling parts that others cannot.

applications for oil & gas

Find out more

Heavy duty turning, milling and drilling characterises the production of components for energy-producing equipment like (wind) turbines. So you need a machine that can take the load. A mill-turn machining centre like the Unicom6000, 7000 and the Uniport7000-MTC or a multi-functional Uniport6000 and 7000 are the ideal solution for producing these demanding parts.

applications for energy

Find out more

For everything from bogies to wheels and weld preparation to wheel carrier machining, Unisign has highly versatile machines like the Univers6000, Uniport6000 and Uniport7000. These moving column and gantry style machining centres are part of the machine tool program that have been designed to deliver extremely high capacity, dynamics, rapid acceleration and offer a generous working area.

applications for train

Find out more

gallery

downloads

Unicom 7000 brochure

Download PDF

Would you like to receive a printed version? Please fill in all fields of the form below:


related machine types

For all inquiries about our Machines and Services, simply fill out the form below. A sales representative will contact you shortly.

* - required fields