Unisign Machine Tools » CNC Machines » Portal » Uniport6000-HV

UNIPORT6000-HV

5-axis portal CNC machining centre

Uniport6000-HV

Extreme machining angles

Simultaneous  5-axis capability

True flexibility

The HV (horizontal/vertical) variant of the Uniport 6000 is a truly cost-effective choice for 5-axis CNC machining of large components. In addition to its generous daylight opening, the Uniport 6000-HV features a tilting nutator head. This can travel through an angle of 100°, going from a vertical plane to 10° over the horizontal, making it possible to adopt even the most extreme machining angles. Coupled with outstanding price/performance, this compact portal machine is a must if you’re looking for true flexibility.

Learn more – inspiring customer stories >>


benefits

Affordable performance

The Uniport 6000-HV with its 2-axis nutator head has a host of productivity features that make it a truly flexible CNC machining centre. What sets it apart is the large horizontal and vertical opening, which makes it possible to machine extremely big parts on a compact portal machine. And that translates into an amazing price/performance ratio from an affordable solution.

Any angle

Able to machine any angle or plane without restriction, this CNC machine with its 2-axis head and cross slide construction is a well thought-out concept that has been developed using proven technology. The drive for the continuously variable B-axis and C-axis is cooled to enhance thermal performance, maintaining accurate positioning. The high speed motor spindle and rapid traverse (40.000 mm/min) give it outstanding dynamic properties.

Full view

The Uniport 6000-HV incorporates a travelling platform with an operator cabin fixed to the right hand column. This makes it easy for operators to ride along safely and keep the machining process in full view. When the time comes to change workpieces, the low step makes getting on to the table extremely easy. The work area is flexible too, with the option to use the entire space for one large piece, or to adopt pendulum machining with the two stations separated by a screen.

technical specifications

This CNC machine, Uniport 6000-HV,  has a chip conveyor on both sides and a HSK-A100 or ISO50 (optional) tooling system, with automatic tool change in the spindle. Other enhancements include a camera system in the work area, with the display mounted on the control panel, and a filter to remove dust, gases and vapour from the work area.

Work Area

  • X-axis
    4.000 - 24.000+ mm
  • Y-axis
    2.500 - 6.000 mm
  • Z-axis
    1.500 / 1.800 mm
  • Vertical clearance
    1.700 / 2.000 mm
  • Distance spindle nose to table vertical position
    200 - 2.000 mm
  • Distance spindle nose to table horizontal position
    190 - 1.950 mm
  • Width between columns
    1.500 - 4.000 mm

Spindle

  • Nutator head with motor spindle
    73/82 kW
    7.000/15.000 min-1
    700/390 Nm
  • B-axis
    ±110
  • C-axis
    ±185

Various

  • Tooling
  • Taper size
    HSK-A100
  • Number of pockets
    # 37-170
  • Tool change time
    12 sec
  • Speed
  • Rapid traverse
    40.000 mm/min
  • Feed Rate
    5-40.000 mm/min
  • Speed B- and C-axis
    15.000 min-1

Accessories

  • Operator platform
    o
  • Pendulum mode
    o
  • Tool measuring and tool break via laser
    o
  • Siemens / Heidenhain
    o

CNC machine applications

  • Logistics
  • Energy
  • General machining

We have established a world leading position in front axle machining. Truck manufacturers and suppliers use our UNITWIN CNC machine to produce more than 2 million front axles every year.

For the complex rear axle machining we also have a dedicated solution: our UNIAXLE. With this new CNC machine you can machine cast iron as well as steel welded rear axles to the greatest precision, in the shortest possible time, all in a single setup.

For everything from bogies to wheels and weld preparation to wheel carrier machining, Unisign has highly versatile machines like the Uniport6000 and Uniport7000. These gantry style machining centres are part of the machine tool program that have been designed to deliver extremely high capacity, dynamics, rapid acceleration and offer a generous working area.

applications for logistics

Find out more

Heavy duty turning, milling and drilling characterises the production of components for energy-producing equipment like (wind) turbines. So you need a CNC machine that can take the load. A mill-turn machining centre like the Unicom6000, Unicom7000 and the Uniport7000-MTC or a multi-functional Uniport6000 and Uniport7000 are the ideal solution for producing these demanding parts.

Pumps and valves for the oil & gas industry can be highly complex parts to produce with seals, gaskets, flanges and requirements like spiral grooves and elliptical conical eccentric turning. The machining centres from Unisign, with their high degree of automation and specially designed software, are a unique solution capable of milling parts that others cannot.

Find out more

At Unisign we understand that our customers don’t just buy a CNC machine, they buy a process. And price per part is key. So for general applications we offer high torque machines with high material removal rates, including 5-axis and 5-sided machining and a choice of moving table or palletized, depending on the footprint available.

applications for general machining

Find out more

gallery

Related CNC machine types